[slinkelist] Advise Marshal Failed error message
Jon Welfringer
Welfringer@Access1.net
Mon, 25 Oct 1999 10:21:23 -0700
For me - YES - it does work for a while, sometimes a long while,
sometimes a short while.
After the error, the 'no sink' errors will continue to stack up for each
IR that has been received. The only way to clear the program is to
continue clicking on the 'no sink' error - which can take a while if
Slinke has received a lot of IR since you noticed the problem.
For resources, I have the problem on a W95 machine when it is only
running a couple of apps - nothing major. I get the error with only
SlinkX and a Delphi App running (IRHelper). It sometimes happens after
running for only minutes, other times after running for about 12 hours.
Others using IRHelper have not noticed this error at all (or have not
reported it to me). If it is a low resource problem, then possibly the
SlinkX server is the one draining the resources under some certain
circumstances.
- Jon
Colby Boles wrote:
>
> OK. Here's the key question: Does SlinkeServ work with the given SlinkX
> client BEFORE this error happens (e.g. is able to send/receive data)? Or
> does it only happen when you try to start a new SlinkX?
>
> Colby
>
> At 10:12 AM 10/25/99 -0400, Tom Gillispie wrote:
> >I also see this problem from time to time when using SlinkeServ (and the
> >ActiveX control) with CyberHouse. William's suggestion that it happens
> >only when resources are low matches my experience. When the problem
> >occurs, it seems like all SlinkeServ responses (I think it is responses
> >that cause the message) cause an error. I reboot, and all is fine.
> >
> >I don't always run CDJ; this problem seems to happen more frequently
> >right after starting up CDJ.
> >
> >Tom
> >
> > > -----Original Message-----
> > > From: William Hollingworth [SMTP:will@airmail.net]
> > > Sent: Sunday, October 24, 1999 1:38 AM
> > > To: Dave Kolb; Jon Welfringer
> > > Cc: slinkelist@nirvis.com
> > > Subject: Re: [slinkelist] Advise Marshal Failed error message
> > >
> > > I've continued to see both this problem and the problem of the slinke
> > > server hanging Internet related programs from launching properly. It
> > > seems
> > > to only happen when Win98 has been running for a while and is probably
> > >
> > > running lowish on resources (below 30%). Programs like MIrc, Eudora,
> > > Yahoo
> > > Messenger etc. will sometimes hang on launch, until I close the slinke
> > >
> > > server. Then the programs magically spring into life.
> > >
> > > I think Colby has been working on finding a solution, but clearly it's
> > >
> > > still there (and may just be a Win98 related thing).
> > >
> > > Will
> > >
> > >
> > > At 12:54 AM 10/24/99 -0400, Dave Kolb wrote:
> > > >Jon,
> > > >
> > > >Does your Delphi app request and implement an event interface fired
> > > to by
> > > >the Slinke software? Do you do an Advise call on an event sink
> > > interface?
> > > >Sounds like the Slinke software or your client is having a problem
> > > >requesting events. What does SLinke support say?
> > > >
> > > >Dave
> > > >
> > > >-----Original Message-----
> > > >From: Jon Welfringer <Welfringer@Access1.net>
> > > >Cc: slinkelist@nirvis.com <slinkelist@nirvis.com>
> > > >Date: Sunday, October 24, 1999 12:22 AM
> > > >Subject: Re: [slinkelist] Advise Marshal Failed error message
> > > >
> > > >
> > > > >I have consistently gotten the 'Advise Marshall failed' error for
> > > about
> > > > >the last year. It randomly happens with a Delphi App that I wrote
> > > after
> > > > >being up and running for a period of time. I could never get past
> > > my
> > > > >problem and have never heard any other resolutions either.
> > > > >
> > > > >Colby, is it possible to turn error reporting off for these type
> > > > >messages?
> > > > >
> > > > >- Jon
> > > > >
> > > > >
> > > > >
> > > > >"Jeffrey J. Borghoff" wrote:
> > > > >>
> > > > >> Yes Ken, I did install the latest update 10/15 and I am still
> > > getting the
> > > > >> errors.
> > > > >>
> > > > >> -----Original Message-----
> > > > >> From: Ken Geoffrion [mailto:kgeoffrion@hotmail.com]
> > > > >> Sent: Saturday, October 23, 1999 1:55 PM
> > > > >> To: jeffreyj@borghoff.com; colby@nirvis.com
> > > > >> Cc: help@nirvis.com; slinkelist@nirvis.com
> > > > >> Subject: Re: [slinkelist] Advise Marshal Failed error message
> > > > >>
> > > > >> Just as an FYI, I haven't received ANY error messages since
> > > installing
> > > >the
> > > > >> 10/15 version a couple days ago. Is that the version you're on
> > > Jeffrey?
> > > >I
> > > > >> had been getting the same errors before my latest update.
> > > > >>
> > > > >> ----Original Message Follows----
> > > > >> From: "Jeffrey J. Borghoff" <jeffreyj@borghoff.com>
> > > > >> Reply-To: <jeffreyj@borghoff.com>
> > > > >> To: <colby@nirvis.com>
> > > > >> CC: <help@nirvis.com>, <slinkelist@nirvis.com>
> > > > >> Subject: [slinkelist] Advise Marshal Failed error message
> > > > >> Date: Sat, 23 Oct 1999 10:38:55 -0400
> > > > >>
> > > > >> Colby,
> > > > >>
> > > > >> I am consistently getting the following error message, "Advise
> > > marshal
> > > > >> failed" followed by "no slink", at which point the Slink-e server
> > > fails.
> > > > >>
> > > > >> This has been happening since the last two updates.
> > > > >>
> > > > >> Please advise!
> > > > >>
> > > > >> Regards,
> > > > >>
> > > > >> Jeffrey J. Borghoff
> > > > >>
> > > > >> [[ JEFFRE~1.VCF : 3640 in winmail.dat ]]
> > > > >> << winmail.dat >>
> > > > >>
> > > > >> ______________________________________________________
> > > > >> Get Your Private, Free Email at http://www.hotmail.com
> > > > >>
> > > > >> _______________________________________________
> > > > >> slinkelist maillist - slinkelist@nirvis.com
> > > > >> http://www.nirvis.com/mailman/listinfo/slinkelist
> > > > >
> > > > >
> > > > >_______________________________________________
> > > > >slinkelist maillist - slinkelist@nirvis.com
> > > > >http://www.nirvis.com/mailman/listinfo/slinkelist
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >_______________________________________________
> > > >slinkelist maillist - slinkelist@nirvis.com
> > > >http://www.nirvis.com/mailman/listinfo/slinkelist
> > >
> > >
> > >
> > > _______________________________________________
> > > slinkelist maillist - slinkelist@nirvis.com
> > > http://www.nirvis.com/mailman/listinfo/slinkelist
> >
> >
> >_______________________________________________
> >slinkelist maillist - slinkelist@nirvis.com
> >http://www.nirvis.com/mailman/listinfo/slinkelist
>
> Nirvis Systems
> http://www.nirvis.com
> http://kowloon.eecs.berkeley.edu/~cboles
>
> _______________________________________________
> slinkelist maillist - slinkelist@nirvis.com
> http://www.nirvis.com/mailman/listinfo/slinkelist