[slinkelist] Launching CDJ Via Batch File

[Colby Boles]

If you are getting crashes after a couple of days, could you send me your
bugbuddy dumps from this? There's no reason CDJ shouldn't be able to run
indefinitely.

Colby

> -----Original Message-----
> From: slinkelist-admin@nirvis.com [mailto:slinkelist-admin@nirvis.com]On
> Behalf Of Marc Parker
> Sent: Monday, July 10, 2000 3:46 PM
> To: Colby Boles; gtang@gtcons.com; slinkelist@nirvis.com
> Subject: Re: [slinkelist] Launching CDJ Via Batch File
>
>
> Actually guys,  Bill Dickhaus (JDS List) solved the problem. I
> just put the
> path to CDJ.exe in a batch file and it launches when that batch file is
> called. Works like a charm!
>
> The reason I don't leave CDJ running is that I get error messages from it
> after it runs for a day or two and it ends up hanging the machine.
>
> So now, I just send an A-4  A-ON command from the phone or any X-10
> controller and it turns on the AMP, DAC (from the DXS) and launches CDJ,
> does a search for all NON Christmas albums, goes into random playlist mode
> and plays.
>
> A-1 A-OFF reverses the process and shuts down CDJ and turns the equip off.
>
> So far, so good!
>
> Parker
>
>
>
> > From: "Colby Boles" <cboles@nirvis.com>
> > Date: Mon, 10 Jul 2000 12:23:52 -0700
> > To: <gtang@gtcons.com>, "Marc Parker" <parkdog@ix.netcom.com>,
> > <slinkelist@nirvis.com>
> > Subject: RE: [slinkelist] Launching CDJ Via Batch File
> >
> > If you wrote a program which used SlinkX to talk to the CM11a and launch
> > CDJ, then CDJ could also use the CM11a. Why not run CDJ all of
> the time and
> > just use X10 to map to the cdj:sleep and cdj:awaken commands?
> >
> > Colby
> >
> >> -----Original Message-----
> >> From: slinkelist-admin@nirvis.com
> [mailto:slinkelist-admin@nirvis.com]On
> >> Behalf Of Tang, George
> >> Sent: Monday, July 10, 2000 10:25 AM
> >> To: Marc Parker; slinkelist@nirvis.com
> >> Subject: RE: [slinkelist] Launching CDJ Via Batch File
> >>
> >>
> >> That would be a problem, because for that to happen, you'll need
> >> some other
> >> software to be listening from the cm11a computer module for your x-10
> >> command in order to launch CDJ.  Then you'll need to disable
> that software
> >> before CDJ runs in order for it to see the cm11a since only 1
> software can
> >> have access to the cm11a serial port at a time.  Unless you
> don't want CDJ
> >> to have control of x-10, then that's not a problem.  But either
> >> way, you'll
> >> need to write a custom software to be the initial x-10 listener.
> >>
> >> -G
> >>
> >> -----Original Message-----
> >> From: slinkelist-admin@nirvis.com
[mailto:slinkelist-admin@nirvis.com]On
>> Behalf Of Marc Parker
>> Sent: Friday, July 07, 2000 10:37 PM
>> To: slinkelist@nirvis.com
>> Subject: [slinkelist] Launching CDJ Via Batch File
>>
>>
>> I am interested in launching CDJ via an ascii out from a home automation
>> controller (Stargate). I understand this can be done using a
>> batch file, but
>> am not proficient in their use.
>>
>> I ultimately want to be able to start up CDJ from an X-10 command.
>>
>> Can anyone help out on this....
>>
>> Thanks
>> Parker
>>
>>
>>
>> _______________________________________________
>> slinkelist maillist  -  slinkelist@nirvis.com
>> http://www.nirvis.com/mailman/listinfo/slinkelist
>>
>>
>>
>> _______________________________________________
>> slinkelist maillist  -  slinkelist@nirvis.com
>> http://www.nirvis.com/mailman/listinfo/slinkelist
>>
>>
>



_______________________________________________
slinkelist maillist  -  slinkelist@nirvis.com
http://www.nirvis.com/mailman/listinfo/slinkelist