[slinkelist] Anybody Automated a DA30es Receiver via S-Link??

Darren Apfel darrena@MICROSOFT.com
Thu, 9 Mar 2000 10:05:08 -0800


Thanks much, George.  I will try to find the right TV code for the receiver.

Incidentally: I tried 10, even 20 vol+ commands and it barely did
anything...

thanks @gain,
d@
darrena@microsoft.com
http://mobile/

-----Original Message-----
From: George Tang [mailto:GeorgeT@concur.com]
Sent: Thursday, March 09, 2000 9:45 AM
To: Darren Apfel; 'slinkelist@nirvis.com'
Subject: RE: [slinkelist] Anybody Automated a DA30es Receiver via S-Link??

Oh, BTW, the proper syntax is amp_sls:input[15].  I don't know if the square
brackets are required since I'm at work so I can't try it without the square
bracket.  It's probably better to use the brackets.

George

-----Original Message-----
From: slinkelist-admin@nirvis.com [mailto:slinkelist-admin@nirvis.com]On
Behalf Of George Tang
Sent: Thursday, March 09, 2000 9:31 AM
To: 'Darren Apfel'; 'slinkelist@nirvis.com'
Subject: RE: [slinkelist] Anybody Automated a DA30es Receiver via
S-Link??


Darren,

The variable for the input is a hex code, not a "tv".  The hex code varies
from receiver to receiver.  You'll have to experiment a bit, but you can use
the ones in the ampsls.cde file as a starting point. For example:
amp_sls:input 15 is the TV on some receivers.

I have the vol issue as well.  I have 4 vol+/- in my map file.  I wish
there's a way to do either a vol level command like vol 40 or something like
that.

Good luck.
George

-----Original Message-----
From: slinkelist-admin@nirvis.com [mailto:slinkelist-admin@nirvis.com]On
Behalf Of Darren Apfel
Sent: Thursday, March 09, 2000 7:08 AM
To: 'slinkelist@nirvis.com'
Subject: [slinkelist] Anybody Automated a DA30es Receiver via S-Link??


I'm having trouble getting my receiver to behave as I would like it to.  Can
anybody tell me what I'm doing wrong?  See message below...

d@

-----Original Message-----
From: Darren Apfel
Sent: Monday, March 06, 2000 10:14 PM
To: 'David Aue'
Subject: RE: [slinkelist] IR commands to S-Link for Sony Receiver

Thanks David:

Not having much success here...

I have 3 goals:
1. power on tuner, then select TV/DBS as the source
2. volume up
3. volume down

All of them are failing.

I have a DA30ES.  I also have a sony TV.  So I have loaded the amp_sls.cde
and tv.cde files from the sony directory of the device files directory.

Sonytv:?? (haven't figured out what to map to this yet, but I'm subbing temp
commands such as vol+)
{
receiver:power_on
receiver:input tv
}

Receiver powers up fine... but no matter what "variable" I shove next to
input, it defaults to the radio tuner.

Also: the DishPlayer remote really only has 3 non-dish controls: vol+, vol-,
and PIP.  So PIP was going to have to be my receiver power_on command.  But
TV.CDE doesn't have a mapping for PIP.  I suppose I could sample it, but I
have had bad luck with this.

sonytv:vol+
{
receiver:vol+
}

Should be simple... but it just doesn't work right.  The volume control
barely moves.  If I add multiple receiver:vol+ commands, it moves slightly
more, slowly.  Add yet more and I crash CDJ (server busy error).

Same problem with vol-.

thanks,
darren apfel
program manager
darrena@microsoft.com
voice: 425-703-4528
fax: 425-93-msfax

-----Original Message-----
From: David Aue [mailto:aue@nirvis.com]
Sent: Monday, February 21, 2000 1:14 AM
To: Darren Apfel
Subject: RE: [slinkelist] IR commands to S-Link for Sony Receiver

Hi Darren,

You can set up a mapping file to do this.  First load the device files for
the Sony TV remote and for the receiver S-link and then create an event map
from one code to the other.  Check out the help sections on device files and
command mapping for more details.

David Aue
Nirvis Systems

> -----Original Message-----
> From: slinkelist-admin@nirvis.com [mailto:slinkelist-admin@nirvis.com]On
> Behalf Of Darren Apfel
> Sent: Sunday, February 20, 2000 6:50 PM
> To: slinkelist@nirvis.com
> Subject: [slinkelist] IR commands to S-Link for Sony Receiver
>
>
> (Please cc me on any reply)
>
> Hello:
>
> Is there some way to map IR commands to s-link commands to my Sony DA30ES
> receiver?  I'm interested in mapping the following commands:
>
> - Sony TV Power to Receiver Power
> - Sony TV vol+/- to Receiver Vol +/-
>
> I just bought a WebTV/DishPlayer receiver (amazing little unit that has a
> 17GB HD and gives you TiVO-like personal TV features based on the pure
> digital stream coming from the Dish Network satellites).  It has optical
> digital output, which-along with the S-video-I pump through my receiver.
>
> The DishPlayer has a remote control that can be programmed to
> control my TV.
> I haven't found a way to control the unit with my universal
> remote, so I've
> taken to primarily using the DishPlayer's remote when watching TV.  Herein
> lies the problem: the remote's volume and power commands work on
> the TV, but
> I need them to affect the receiver as well, since the signal is routed
> through the receiver and therefore both the TV and the receiver need to be
> turned on... and the volume is controlled solely through the receiver.
>
> Any ideas?
>
> Thanks,
>
> d@
>
>
>
> _______________________________________________
> slinkelist maillist  -  slinkelist@nirvis.com
> http://www.nirvis.com/mailman/listinfo/slinkelist
>
>


_______________________________________________
slinkelist maillist  -  slinkelist@nirvis.com
http://www.nirvis.com/mailman/listinfo/slinkelist



_______________________________________________
slinkelist maillist  -  slinkelist@nirvis.com
http://www.nirvis.com/mailman/listinfo/slinkelist